ALPATEC CT 3000 Especificaciones descargar pdf (Pagina 11)

OPERATIONS

- The switch is located under the base of the device:

- O …. Off

- I …. On

1. Assemble the device as described above.

2. Plug it into a waterproof outlet after having verified that the voltage corresponds to the

indicated voltage.

3. Press the On button.

MAINTENANCE

1. Turn the device off and unplug it. If the device was on before cleaning, wait until it has

cooled down so you do not burn yourself.

2. With a soft cloth, carefully clean the device. Never use alcohol, solvents or acids such

as vinegar or abrasives.

TROUBLESHOOTING

Issues Potential causes Solutions

The device will not The device is not Remove the plug and plug

turn on. plugged in properly. it in again properly.

The plug is defective. Have it replaced by an

electrician.

The device does not An object is preventing the Place it on a flat and stable

work, but the current On/Off button from working service. Look for the object

passes through. properly. to be removed.

The device functions, Verify your electrical Have it checked by an

then suddenly stops power system/fuse/circuit electrician.

functioning. breaker.

SPECIFICATIONS

Model CT 3000 S

Voltage 230 V – 50 Hz

Power 3000 W

Protection IPx4

notice_CT 3000 S: notice_CT3000 19/12/12 9:46 Page 11

1 2 ... 6 7 8 9 10 11 12

Sin comentarios

ALPATEC CT 3000 Especificaciones Pagina 11